1. Cam lever shaft (4 places): 1 drop of oil every 2 months.
2. Roller arm assembly (3 places): 1 drop of oil every 2 months.
3. Crank housing (2 places): 1 drop of oil every 2 months.
4. Latch pivot (2 places): 1 drop of oil every 2 months.
5. Off-spot lever pivot (2 places): 1 drop of oil every 6 months.
6. Spring hanger pivot bolts (2 places): 1 drop of oil every 2 months.7. Apply grease to the table drive eccentric assembly once per year.
8. Apply grease to the shuttle cam follower once a month.
9. Apply a light coating of grease to the cam ball every 6 months.
10. Apply a light coating of grease to the inside of the clevis every 6 months.